Scribe marking machines and sample marks
Q: When your device mark one single dot on the part, what is the shape of the dot? Is it a square or is it a perfect round dot? A: 1. For a dot. The I-Mark unit travels to a X & Y location and pulses an electric solenoid with Read more…
Part: Copper Tube Fitting Scribe Material:Coppr Character size:1/8” Number of characters: 15Character Note: One line of Information Machine used: IMC150 Cycle time: 6.6 Seconds For more on the marking system used please see:http://columbiamt.com/CMT-Dot-Peen-Scribe/EcoMark_Laser_Marking_Machine_2.html#210
Part:Steering Component Material: Steel Character size: 1/8″ Number of characters: 5 Note: One lines of information Machine used: IM-IS60 Air scribe PSI: 30 Cycle time: 5 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/
Part:Various Fittings Material: Metal Character size: 2D Code Number of characters: N/A Note:One lines of information Machine used: IM-IS60 Air scribe Cycle time: 4 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/
Q: Should the IM- IS Integrator Scribe marking system be dry cycled? A: NO. Dry cycling of the IM-IS causes undo wear to the pin and pin housing. The pin actuates to the full length of the housing and breaks internal components.
I-Mark INTEGRATOR SCRIBE 60 – IM-IS60 “SilentScribe” marking machine includes:
1) IMIS60 Marking Head Assembly
2) Model 200 Controller
3) PC software (Customer supplied PC required for initial programming, and may be used for monitoring over Ethernet)
4) Cable to connect Marking Head to Controller, 10 ft
5) Ethernet crossover cable to connect controller directly to PC 2 ft (RED)
6) Ethernet Patch Cable to connect controller via network or ethernet switch 2 ft (BLUE)
7) 6 ft cable 110VAC power supply
Head Light Cover Part: Headlight Cover Material: Plastic Character size: 3/16″ square Number of characters: 11 Machine used: IM-IS60 Air scribe Cycle time: 10 sec PSI:18 For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe
IM-C AE05146 Custom Turn-Key I-Mark UID Mark n Read station includes all required components for setting up a marking station: 1) Marking head IMC-ST150-AS air scribe with marking window 100mm x 150mm (4″ x 6″), stepper motors and ***********uses aircraft type diamond stylus (IMIS-PIN-UID) 2) Controller Series-200 3) Dell PC Read more…
The open end of the I-60-Series marker has drilled and tapped holes for mounting the debris shield. At one plant they mounted a standoff bumper for the robot to press the part against. The frame of the marker is very strong, but is not designed for this purpose. This is Read more…