Micro-percussion marking method using CNC technology
Round Tool Handle Part: Round Tool Handle Material: Steel Character size: 1/8″ Number of characters: 10 Note: One Lines of information Machine used: Handy Andy PSI:35 Cycle time: 13 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/Handy_Andy.html
Part: Machined Pasrts Material: Aluminum Character size: 1/8″ Number of characters: 8 Note: One Lines of information Machine used: Handy Andy PSI:20 Cycle time: 10 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/Handy_Andy.html
Polycoated Stainless Banding Part: Polycoated Stainless Banding Material: Stainless Steel Character size: 1/4″ Number of characters: 21 Note: One Lines of information Machine used: Handy Andy PSI:40 Cycle time: 13 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/Handy_Andy.html
The open end of the I-60-Series marker has drilled and tapped holes for mounting the debris shield. At one plant they mounted a standoff bumper for the robot to press the part against. The frame of the marker is very strong, but is not designed for this purpose. This is Read more
Part:Appliance Component Material: Steel Character size: 1/8″ Number of characters: 4 Note: One line of information Machine used: IM-ID60 Dot-Peen Air Pressure: 40 PSI Cycle time: 5 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/
Q: Good afternoon, My customer currently uses a Telesis TMP-1700 marking system but would like to switch to a Columbia. Can you provide pricing for the similar unit? Thanks! A: CMT has THREE systems that compare with the TMP1700, and ONE that will actually run it. Handy Andy for low production Read more
Part: Cookware Base Material:Plastic Character size: 3/32″ characters Number of characters 4 Note: PLastic part turns color when dot-peened making a contrasting mark. Machine used: Handy Andy Cycle time: 5-7 sec Air Pressure: 40 psi For more on the marking system used please see:http://www.columbiamt.com/store/Dot-Peem_Marking.html
Part:Engine Part Material: Sheet Metal Character size: 1/8″ Number of characters: 12 Note:Two lines of information Machine used: IM-IS60 Air scribe Cycle time: 20 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/
Part:Steel Rim Material: Steel Character size: 1/8″ Number of characters: 5 Machine used: IM-ID60 Dot-Peen Cycle time: 1-2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen
Part:Brass Plug Material: Brass Character size: 3/32″ Number of characters: 6 Note: One lines of information marked with IMID60 Fixed-Dot Machine used: IM-IS60 Air scribe Cycle time: 3 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/