Dottie Peene – Page 110 – MarkingWiki Presented by Columbia Marking Tools

Air Hammer Examples

Wood Block Marked With Model 95

Part: Rolled Steel Material: Wood Block Character size: 1/4″ Number of characters: 4 Model: POW-R-Mark model 95 with custom holder Cycle time: 1 sec Air pressure: 80 psi Number of Characters:4 Notes: When marking wood please request special engraved characters. These character include smaller included angle with sharper imprint capability. For Read more…

By Dottie Peene, 14 yearsMarch 21, 2011 ago

Dot-Peen Examples

Appliance Component Marked With Dot-Peen

Part:Appliance Component Material: Steel Character size: 1/8″ Number of characters: 4 Note: One line of information Machine used: IM-ID60 Dot-Peen Air Pressure: 40 PSI Cycle time: 5 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/

By Dottie Peene, 14 yearsMarch 15, 2011 ago

Scribe Mark Examples

Appliance Component Marked With Scribe

Part:Appliance Component Material: Steel Character size: 1/8″ Number of characters: 5 Note: One lines of information Machine used: IM-IS60 Air scribe PSI: 30 Cycle time: 5 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/

By Dottie Peene, 14 yearsMarch 15, 2011 ago

Scribe Mark Examples

Alumnum Plate Marked With Scribe

Part:Cast Alumnum Plate Material: Alumnum Character size: 3/16″ Number of characters: 17 and 2D Code julian date code Note:One lines of information Machine used: IM-IS60 Air scribe Cycle time: 35 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe

By Dottie Peene, 14 yearsMarch 11, 2011 ago

Scribe Marking Machines

IMC Scribe Marking Machine

Front View IMC

Project Scope: CMT to supply a stand alone Diamond Scribe marking machine to mark a high resolution Square Dot 2D Matrix with man-readable text and non-printing ASCII characters (additional mark security) onto automotive racing parts. Materials are steel and aluminum. Machine is manual load / unload. Marking times vary from 20 seconds to 2 minutes depending on the part.

CMT to provide:
a) Heavy duty machine base
b) Marker swing arm – for large part marking
c) IM-C marking system capable of dot-peen or scribe marking. Scribe marking is required for CMT patented Square-Dottm
d) Programmable electric Z axis, 100mm
e) Cognex Camera – fully integrated into marking station to provide mark and read system
f) Upgraded operator Face with industrial touchscreen
g) IM software with customization to include: seamless interface with Cognex, additional non-printing ascii characters in 2D code (similar to UID constructs), and writing elements from the mark read process to an ascess data file (customer to provide elements required)

Options:

a) Replacement pin
b) Hand held Cognex reader

Close up IMC

Picture of marked part

(more…)

By Dottie Peene, 14 years ago

Scribe Mark Examples

Steel Camshaft Marked With IMC Scibe

Part:Stainless Steel Camshaft Material: Steel Character size: 1/8″ Number of characters: 19 Note:Two lines of information Machine used: IMC Air scribe Cycle time: 45 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/

By Dottie Peene, 14 yearsMarch 4, 2011 ago

Scribe Mark Examples

Stainless Steel Plate Marked with Air Scribe

Part:Stainless Steel Plate Material: Stain Steel Character size: 3/16″ Number of characters: 10 Note:Two lines of information Machine used: IMC Air scribe Cycle time: 6-7 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/

By Dottie Peene, 14 yearsFebruary 28, 2011 ago

Scribe Mark Examples

Alumnum Tag Marked With Scribe

Part:Alumnum Tag Material: Alumnum Character size:3/16″ Number of characters: 17 and 2D code Note:One lines of information Machine used: IM-IS60 Air scribe Cycle time: 35 sec 40psi For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe

By Dottie Peene, 14 years ago

Hot stamping Examples

Electrical Wire Connectors Marked Hot Stamp

Part: Electrical Wire Connectors Material: Plastic Character size: 1/8″ Number of characters: 6 Characters One line of variable information Note: foil used to make contrasting mark Machine used: Model 912 Dwell: 3/32″ Second Temperature: 350F Pressure: 45psi Cycle time: 2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Hot-Stamping/

By Dottie Peene, 14 yearsFebruary 2, 2011 ago

Scribe Mark Examples

Appliance Component Marked With Air Scribe

Part:Appliance Component Material: Metal Character size: 1/8″ Number of characters: 5 Note:One lines of information Machine used: IM-IS60 Air scribe Cycle time: 4 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/

By Dottie Peene, 14 yearsJanuary 27, 2011 ago