Aluminum Car Part Marked With Air Impact Marker

Published by Dottie Peene on

Aluminum Car Part

Aluminum Car Part

Part: Aluminum Car Part
Material: Aluminum
Character size: 1/8″
Number of characters: 4 Characters One line of variable information

Note: the 451 offers a “quieter” impact mark due to the mass damping effect of the cylinder body. Please note that most of the impact marking process “noise” is due to the part reverberation in the fixture.

Machine used: Model 451
Air Pressure: 60 psi
Cycle time: 3 sec

For more on the marking system used please see:
http://columbiamt.com/CMT-Impact-Marking

Categories: Air Impact Examples
Tags:

Related Posts

Air Impact Examples

Marking before coating

Many times the marking part/product must be done prior to the coating process. It is there fore important to select a marking process that provides sufficient depth to be visible after the coating process. - Example provided for a great solution.

Round Steel Tube with Prick Punch
Air Impact Examples

Round Steel Tube – Prick Punch with Impact Marker

Mite-E-Mark Model 78 is used for more than marking. Denting, and deforming. Just a small punch makes a big impact.

Air Bag Tube and Coupller
Air Impact Examples

Identification marking made simple.

Identification marking made simple. The Model 78 packs a punch for its size.