Part: Flat Steel Part Material: Steel Character size: 1/8″ Number of characters: 9 Characters One line of variable information Machine used: 860 all air roll marking machine with A61 cylinder (6100lb) Air Pressure: 20 psi Cycle time: 3 sec For more on the marking system used please see: http://columbiamt.com/CMT-Press-Roll-Marking/Roll_Marking_Floor_Style.html
Part: Pistol Slide Material: Steel Character size: 1/4″ Number of characters: One Line of 4 characters Machine used: 860 all air roll marking machine with A43 cylinder (4300lb) Air Pressure: 35 psi Cycle time: 3 sec For more on the marking system used please see: http://columbiamt.com/CMT-Press-Roll-Marking/Roll_Marking_Floor_Style.html
Part: Shot Gun Choke Material: Steel Character size: 1/16″ Number of characters: 4 Characters One line of variable information Machine used: 860 all air roll marking machine with A43 cylinder (4300lb) Air Pressure: 10 psi Cycle time: 2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Press-Roll-Marking/Roll_Marking_Floor_Style.html
Part: Heavy Duty Round Steel Tube Material: Steel Character size: 3/16″ Number of characters: 7 Characters One line of variable information Machine used: 860 all air roll marking machine with A61 cylinder (6100lb) Air Pressure: 30 psi Cycle time: 3 sec For more on the marking system used please see: http://columbiamt.com/CMT-Press-Roll-Marking/Roll_Marking_Floor_Style.html
Part: Cast Iron Bolt Material: Cast Iron Character size: 1/8″ Number of characters: 3 Characters One line of variable information Machine used: 860 all air roll marking machine with A43 cylinder (4300lb) Air Pressure: 60 psi Cycle time: 2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Press-Roll-Marking/Roll_Marking_Floor_Style.html
Part: Steel Flat Pad Material: Steel Character size: 1/4″ Number of characters: 6 Character and dash One line of variable information Note: Machine used: 860 all air roll marking machine with A61 cylinder (6100lb) Air Pressure: 100 psi Cycle time: 2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Press-Roll-Marking/Roll_Marking_Floor_Style.html
Part: Round Steel Disks Material: Steel Character size: 1/8″ Number of characters: 9 Characters One line of variable information Note: Roll marking on round parts puts only a portion of the character in contact with the part at any time (small diameters) this results in a smalller amount of force being required Read more…
Part: Round Steel Bearing Material: Steel Character size: 1/8″ Number of characters: One Line of 17 characters Note: Machine is capable of up to (28) 1/8″ characters Machine used: 860 all air roll marking machine with A61 cylinder (6100lb) Air Pressure: 60 psi Cycle time: 3 sec For more on the marking Read more…