Custom Embossing Dies AD03807-Custom Embossing Dies to Read: SPRUCE (logo per attached example) * Logo 7/8″ high x 2 3/4″ wide * Marking 3.9″ x 2″ Soap Tins * Upper female Die and Lower male die
Forgded Rail Part:Forgded Rail Material:Aluminum Character size: N/A Number of characters: N/A Note: 2D Machine used: Laser Cycle time: 10 Seconds For more on the marking system used please see:http://columbiamt.com/CMT-Dot-Peen-Scribe/EcoMark_Laser_Marking_Machine_2.html#210
Aluminum Block Mark # 2 Part: Aluminum Block Material:Aluminum Character size: N/A Number of characters: N/A Note: 2D Code Machine used: IM-IS60 Air scribe PSI: 20 Cycle time: 12 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe
Part:Appliance Component Material: Steel Character size: 1/8″ Number of characters: 5 Note: One lines of information Machine used: IM-IS60 Air scribe PSI: 30 Cycle time: 5 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/
Part: Transmission Case Material: Aluminum Character size: 1/16″ Number of characters: 4 Note: Swaging of coil Machine used:Model 78 Air Pressure: 60 psi Cycle time: 2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking
Part: Upper Valve Body Material: Aluminum Character size: 1/8″ Character Number of characters: 14 Character & 2D Code Note: Three line of Information & 2D Code Machine used: Laser Cycle time: 30 Seconds For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/EcoMark_Laser_Marking_Machine_2.html