When replacing your stamps in your roll type holder it is very important to make that your stamps are properly set in the holder before you tighten down and attach to your machine. Columbia’s wedge type steel stamps are designed to fit into our RM roll type […]
Thank you for providing CMT the opportunity to show you the new Square-Dot technology. This technology was developed to save customers money and provide them with a viable alternative solution to the expensive laser in marking 2D codes. CMT and other dot-peen manufacturers are well aware of […]
Problem: We took a controller from another machine that is undergoing some work. The controller I have currently has all the correct firmware. I do have an issue, whenever I print out data, it seems to all be backwards. IE, if I try to print 1234, I get 4321. Do […]
The Press Style Impact marking system is the perfect solution for marking limited lot or QC numbers on aluminum, steel and cast iron parts. Press Style Impact Marking Unit: Model 98 air impact marker with Rod style ”OAS75” for (6) 1/8” CMG13 characters Air powered ram with spring return […]
Sample mark was done on CMT I-Mark IMI60 *Parts were provided with a sample of current mark. Test mark to show the how CMT’s Scribe can make a reliable stress free mark Test Mark Marking: Torx 5/16” Hex Bit Material: SAS ( MAT35.1.53) Reading: logo […]
This document outlines how to setup and use the I-Mark start button which is purchased separately from CMT. The start button will be used to execute a particular program over and over without needing to interact with the software. This is useful if a PC is not available […]
Square – Dot Test Mark Model: IMIS60 Integrator Ballscrew driven scribe marking system Marking: Transmission Cover Material: Aluminum Casting Characters: 1/8” characters Reading: Date code/shift code. Serial number. With a 2D Square Dot Data Matrix 120815(sp)1(sp) 000 Square Dot Cycle time: 53 Seconds PSI: 30 PSI Mark location: Side […]
Graphics Handy Andy X also allows you to add DXF graphics or logos to your marking layout, You can input a graphic by selecting graphic from the ribbon or dragging it for the entity tool box. Once you click on the graphic icon […]
Creating a New Layout To create a new layout, you select the grid with a green plus sine in the top right corner of your program ribbon. After you select the new layout icon you will see a grid appear on your canvas. […]
Side by side test of the same part being marked two different ways. Aluminum Part Mark (25) 1/8″ characters with corresponding 2D code Method #1 Dot-Peen with IMID60 I-Mark Integrator Dot-Peen System IMID60 2D Code Method #2 Scribe with IMC150 I-Mark Custom Scribe System – Square -Dot IMC Square Dot 2D code […]