Part: Transmission Case Material: Aluminum Character size: 1/16″ Number of characters: 4 Note: Swaging of coil Machine used:Model 78 Air Pressure: 60 psi Cycle time: 2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking
Part: Steering Shaft Material: Steel Character size: 3/32″ Number of characters: 1 Note: Swaging of coil Machine used:Model 298 Air Pressure: 30 psi Cycle time: 2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking
Part: Steel Coil Material: Steel Character size:N/A Number of characters: 2 Note: Swaging of coil Machine used:Model 298 Air Pressure: 80psi Cycle time: 2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking
Part: Plastic Terminal Support Material: Plastic Terminal Support Character size: 1/4″ Character Number of characters: 5 Character Note: One line of Information Machine used: Laser Cycle time: 6 Seconds For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/EcoMark_Laser_Marking_Machine_2.html
Part: Aluminum Cylinder Head Material: Aluminum Character size: 1/4″ Character Number of characters: 16 Character Note: One line of Information Machine used: Laser Cycle time: 17 Seconds For more on the marking system used please see:http://columbiamt.com/CMT-Dot-Peen-Scribe/EcoMark_Laser_Marking_Machine_2.html#210
Part: Upper Valve Body Material: Aluminum Character size: 1/8″ Character Number of characters: 14 Character & 2D Code Note: Three line of Information & 2D Code Machine used: Laser Cycle time: 30 Seconds For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/EcoMark_Laser_Marking_Machine_2.html
Part: Retainer Material: Metal Character size: 1/8″ Character Number of characters: 13 Character per line 2D Code Note:Two line of Information Machine used: Laser Cycle time: 13 Seconds For more on the marking system used please see:http://columbiamt.com/CMT-Dot-Peen-Scribe/EcoMark_Laser_Marking_Machine_2.html#210
Simple concepts were forgotten in the design and manufacture of the above embossing die. What they did was perfectly match two pieces of metal to form a die. What they forgot was how the metal would move and the forces Read more…
Part: Suspensioin Component Material: Steel Character size: 1/8″ Character Number of characters: 8 Character per line Note:Two line of Information Machine used: Laser Cycle time: 3 Seconds For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/EcoMark_Laser_Marking_Machine_2.html
Part: Round Metal Ring Material: Metal Character size: Bar Code Number of characters: 7 Character and Bar Code Note: Machined marked area on side of part with Bar Code Machine used: Laser Cycle time: 18 and 36 sec For more on the marking Read more…