Part: Steel Flat Pad Material: Steel Character size: 1/4″ Number of characters: 6 Character and dash One line of variable information Note: Machine used: 860 all air roll marking machine with A61 cylinder (6100lb) Air Pressure: 100 psi Cycle time: 2 sec For more Read more
Part: Aluminum Casting Material: Aluminum Character size: 1/8″ Number of characters: 5 Characters One line of variable information Machine used: Model 451 Air Pressure: 60 psi Cycle time: 2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking
Part: Aluminum Car Part Material: Aluminum Character size: 1/8″ Number of characters: 4 Characters One line of variable information Note: the 451 offers a “quieter” impact mark due to the mass damping effect of the cylinder body. Please note that most of the Read more
Part: Forged Fitting Tee Material: Aluminum Character size: 1/8″ Number of characters: 5 Characters One line of variable information Note: Dot Style Stamps can make a deeper mark with the same amount of force as sharp face character stamps. For this reason they Read more
Part:Steel Rim Material: Steel Character size: 1/8″ Number of characters: 5 Machine used: IM-ID60 Dot-Peen Cycle time: 1-2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen
Part: Forged Fitting Tee Material: Aluminum Character size: 1/8″ Number of characters: 5 Characters One line of variable information Machine used: Model 851 Air Pressure: 80 psi Cycle time: 2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking
Part: Material: Steel Pole Character size: 1/16″ Number of characters: 18 Characters One line of variable information Machine used: Model 851 Air Pressure: 80 psi Cycle time: 2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking
Part: Material: Reinforcement Plate Character size: 1/8″ Number of characters: 7 Characters One line of variable information Machine used: Model 851 Air Pressure: 80 psi Cycle time: 2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking
Part: Cleat–Self Locking Material: Aluminum Character size: N/A Number of characters: One Prick Punch Machine used: Model 78 Air Pressure: 80 psi Cycle time: 1 sec Nice example of non-marking application. For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking
Part: Clutch Housing Material: Steel Character size: 1/8″ Number of characters: One Machine used: Model 78 Air Pressure: 60 psi Cycle time: 1 sec For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking