Dot-Peen offers low impact and flexible marking
Material: Stainless Steel Character size: 1/4″ Number of characters: 21 Note: Two Lines of information Machine used: Handy Andy PSI:20 Cycle time: 25 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/Handy_Andy.html
Round Tool Handle Part: Round Tool Handle Material: Steel Character size: 1/8″ Number of characters: 10 Note: One Lines of information Machine used: Handy Andy PSI:35 Cycle time: 13 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/Handy_Andy.html
Part: Machined Pasrts Material: Aluminum Character size: 1/8″ Number of characters: 8 Note: One Lines of information Machine used: Handy Andy PSI:20 Cycle time: 10 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/Handy_Andy.html
Polycoated Stainless Banding Part: Polycoated Stainless Banding Material: Stainless Steel Character size: 1/4″ Number of characters: 21 Note: One Lines of information Machine used: Handy Andy PSI:40 Cycle time: 13 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/Handy_Andy.html
Part:Appliance Component Material: Steel Character size: 1/8″ Number of characters: 4 Note: One line of information Machine used: IM-ID60 Dot-Peen Air Pressure: 40 PSI Cycle time: 5 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/
Part: Cookware Base Material:Plastic Character size: 3/32″ characters Number of characters 4 Note: PLastic part turns color when dot-peened making a contrasting mark. Machine used: Handy Andy Cycle time: 5-7 sec Air Pressure: 40 psi For more on the marking system used please see:http://www.columbiamt.com/store/Dot-Peem_Marking.html
Part:Engine Part Material: Sheet Metal Character size: 1/8″ Number of characters: 12 Note:Two lines of information Machine used: IM-IS60 Air scribe Cycle time: 20 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/
Part:Steel Rim Material: Steel Character size: 1/8″ Number of characters: 5 Machine used: IM-ID60 Dot-Peen Cycle time: 1-2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen
Part:Brass Plug Material: Brass Character size: 3/32″ Number of characters: 6 Note: One lines of information marked with IMID60 Fixed-Dot Machine used: IM-IS60 Air scribe Cycle time: 3 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/
Part: Aluminum Metal Tubing Material: Aluminum Metal Character size: 1/16″ characters Note: One line 6 characters Machine used: IMID60 Dot Peen Cycle time: 3-4 sec For more on the marking system used please see:http://www.columbiamt.com/store/Dot-Peem_Marking.html