Air powered marking tools.
Part: Material: Reinforcement Plate Character size: 1/8″ Number of characters: 7 Characters One line of variable information Machine used: Model 851 Air Pressure: 80 psi Cycle time: 2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking
Part: Cleat–Self Locking Material: Aluminum Character size: N/A Number of characters: One Prick Punch Machine used: Model 78 Air Pressure: 80 psi Cycle time: 1 sec Nice example of non-marking application. For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking
Part: Clutch Housing Material: Steel Character size: 1/8″ Number of characters: One Machine used: Model 78 Air Pressure: 60 psi Cycle time: 1 sec For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking
Material:Steel Barrel Character size: 1/8″ Character Number of characters: 3 Character Note: One line of Information Machine used: Model 451 Air Pressure: 60 psi For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking
Part: Round Metal Barrel Material: Metal Character size: 1/8″ Number of characters: 3 Note: Machine used:Model 451 Air Pressure: 60 psi Cycle time: 4 sec For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking
Part: Transmission Case Material: Aluminum Character size: 1/16″ Number of characters: 4 Note: Swaging of coil Machine used:Model 78 Air Pressure: 60 psi Cycle time: 2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking
Part: Steering Shaft Material: Steel Character size: 3/32″ Number of characters: 1 Note: Swaging of coil Machine used:Model 298 Air Pressure: 30 psi Cycle time: 2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking
Part: Steel Coil Material: Steel Character size:N/A Number of characters: 2 Note: Swaging of coil Machine used:Model 298 Air Pressure: 80psi Cycle time: 2 sec For more on the marking system used please see: http://columbiamt.com/CMT-Impact-Marking
Q: Can the marking orientation be changed on the Slide-A-Mark? A: Yes. 1) Loosen the front collar 2) Rotate to required orientation 3) Retighten, be sure to not over tighten or marker will not function properly.
Q: Can the ports or mounting bracket be rotated on the model 88, model 98, model 288, or model 298? A: No. The mounting bracket and the sleeve of the cylinder are assembled with such force that after assembly the cylinder is internally honed. To disassemble the part would require Read more…