Large bed laser enclosure CMT Eclipsetm LE48 is a perfect versatile large part laser marking station. The LE48 is a Class 1 certified laser enclosure (CDRH). CMT offers a variety of laser source selection, along with 4 optional automated axis (X, Y, Z, and Omega to mark around the OD of parts).
Marking Solution tested: Standard 751KA and KB holders Part Description: Rear Lower Control Arm Part Material: High Strength Alloy. Marking info: 1234 Character Size: 4 1/8″ Information in 2D Code: N/A Mark cycle time required: 5 Seconds Reason for test mark: Air Pressure: 75 PSI Cycle Time: 2 seconds
The popular Slide-A-Mark has been upgraded with new operator start buttons. These buttons offer a more narrow profile and easier to use.
Sometimes a 2D code is required on the OD of a round part. This can be a challenge with the rounded surface. While the mark can be made – the camera reading will be nearly impossible due to the reflection of the light of the curved surface. CMT has overcome this challenge implementing 2 upgrades to the standard 2D code
The Handy Andy X software can be ran on Windows XP to Windows 10.
Custom I-Mark Model IM-C150 Video – marking on outer diameter. Scribe and dot-peen 3 axis system.
I-Mark demonstration on how to change a pin on an IMID60 dot peen marking unit.
Columbia Marking Tools Slide-A-Mark 10 ton air impact marker was used to make the dot-style character marks in this steel automotive part.
CMT Eclipse LE48 is a perfect versatile, low volume, large bed part laser enclosure. The LE48 is a Class 1 CDRH certified laser enclosure . CMT offers a variety of laser source selections, along with 4 optional automated axis (X, Y, Z, and rotators to mark around the OD of Read more