Q: For the Model 78, when it impacts it seems to exhaust a lot of air. This is normal correct? Its just some sort of a quick exhaust? A: The seals are design to release the air when the marker contacts the part. The cylinder is not design to remain in Read more…
Q: What is the load height of the 4 sided barstock marker model 4040SD? A: The base includes holes for leveling feet and lagging to the floor however they are not included with the machine. Attached is a screen shot of what comes in the the base standard. The load Read more…
Q: What sensor is integrated in the model 288-OB-25-D? A: Eurofast: Small metric (M12 x 1 thread)10 volt/ 65 voltDC4 pin, 3 wire, normally open (+, pnp sourcing)Used in -E option of Model 78 Mite-E-Mark or -D of other air impact markers and hot stamping systems
Q: What is the NPT and the Tube size required to install the model 288? A: The tube size is 3/8” with a ½” shop air line into the valve. The air connection is 3/8″ NPT. For the complete operation guide please see the following document – http://www.columbiamt.com/CMT-Impact-Marking/Catalog/288_OG_and_parts.pdf
Q: Does the model 88 have a switch to tell that it’s returned and away from the part? A: No. The model 88 does not have return switch because the return force is generated with a spring. The model 88 is a single acting cylinder – air forward, spring return. Read more…
While CMT has been working with Microsoft to get the digital signatures working, sometimes the drivers might not load correctly. HandyAndy_Drivers_1.2.3.zip Please download and run this exe. to fix the issue with your Handy Andy.
Air Requirements A simple chart gives various information for Air Impact Models. The information includes the bore size, stroke length, and relative time to extend, CV, SCFM, and expected drop in pressure of the compressed air. The Air Impact Marker is not generated solely dependent on the air flow. The Read more…
CMT uses Turck Brand sensors. The wiring instructions are all provided by Turck. Q: What is the wiring instructions A: These are provided my the manufacturer. Turck Sensor Wiring Explaination