IM-C150 Machine

IM-C150

IM-C150-ST-AS-ZE I-Mark   programmable scribe unit includes all required components for setting up a marking station:

*Marking head with 4″ x 6″ (150mm x 100mm) marking window and air scribe diamond styls
*Controller Series-200 With 3rd axis upgrade for Electric Z
*IM Z axis Approach Slide – Electric
*I-Mark PC software (Customer supplied PC required for initial programming, and may be used for monitoring over Ethernet)
*Cable to connect Marking Head to Controller, 10 ft
*Crossover cable to connect controller to PC (not required if connected directly to internet)
*Requires 1 shop air line 1/4″ NPT and 110VAC power supply

MISC MACH AG4295A:  Custom, benchtop H-frame to mount IMC150
1.   Sub-assembly head frame for IM-C150-ST-AS-Z150-E  3 axis installation.
2.   Including uprights, lock in place clamps, bearing rails and mounting plates.
3.   Head frame and I-Mark to be assembled.