Drill Bit Marked With Laser
Drill Bit
Part: Drill Bit
Material: high carbon steel
Character size: 1/8″
Number of characters: 6
Note: One line of Information
Machine used: Laser
Cycle time: 11 Seconds
For more on the marking system used please see:http://columbiamt.com/CMT-Dot-Peen-Scribe/EcoMark_Laser_Marking_Machine_2.html#210
Plastic Cover Marked With Laser
Plastic Cover
Part: Plastic Cover
Material:Plastic
Character size: N/A
Number of characters: 2D Code
Note: One line of Information
Machine used: Laser
Cycle time: 6.6 Seconds
For more on the marking system used please see:http://columbiamt.com/CMT-Dot-Peen-Scribe/EcoMark_Laser_Marking_Machine_2.html#210
Stainlees Steel Plate Marked With Scribe
Stainlees Steel Plate
Part: Stainless Steel Plate
Material: Stainless Steel
Character size: 1/8”
Number of characters: 20
Note: Two lines of information
Machine used: IM-IS60 Air scribe
PSI: 30
Cycle time: 5 sec
For more on… Continue reading
Steel Tube Marked With Scribe
Steel Tube
Part:Cast Steel Tube Material: Steel Character size: 3/16″ Number of characters: 26
Note: Two lines of information
Machine used: IM-IS60 Air scribe Cycle time: 20 sec
For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe
Bearing Cap Casting Marked With Scribe
Bearing Cap Casting
Part:Bearing Cap Casting Material: Aluminum Character size: 1/2″ Number of characters: 5 Note: One line of information Machine used: IM-IS60 Air scribe Cycle time: 3 sec
For more on… Continue reading
Steering Knuckles Marked With Model 95
Steering Knuckles
Part: Steering Knuckles Material: Cast Iron Number of Characters: Prick Punch Model: 95 POW-R-MARK Cycle time: 2 sec Air Pressure: 60 psi
For more on the marking system used please see:http://www.columbiamt.com/store/95_High_Power_Air_Hammer.html
Cold Rolled Steel Marked With Model 95
Cold Rolled Steel
Part: Rolled Steel Material: Cold Rolled Steel Character size: 1/8″ Cycle time: 1 sec 80 psi Number of Characters: 1
For more on the marking system used please see:http://www.columbiamt.com/store/95_High_Power_Air_Hammer.html
Wood Block Marked With Model 95
Wood Block
Part: Rolled Steel Material: Wood Block Character size: 1/4″ Number of characters: 4 Model: POW-R-Mark model 95 with custom holder Cycle time: 1 sec Air pressure: 80 psi Number of Characters:4… Continue reading
Appliance Component Marked With Dot-Peen
Appliance Component
Part:Appliance Component Material: Steel Character size: 1/8″ Number of characters: 4 Note: One line of information Machine used: IM-ID60 Dot-Peen Air Pressure: 40 PSI Cycle time: 5 sec … Continue reading