Aluminum Block Mark # 2 Part: Aluminum Block Material:Aluminum Character size: N/A Number of characters: N/A Note: 2D Code Machine used: IM-IS60 Air scribe PSI: 20 Cycle time: 12 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe
Part: Drill Bit Material: high carbon steel Character size: 1/8″ Number of characters: 6 Note: One line of Information Machine used: Laser Cycle time: 11 Seconds For more on the marking system used please see:http://columbiamt.com/CMT-Dot-Peen-Scribe/EcoMark_Laser_Marking_Machine_2.html#210
Part: Plastic Cover Material:Plastic Character size: N/A Number of characters: 2D Code Note: One line of Information Machine used: Laser Cycle time: 6.6 Seconds For more on the marking system used please see:http://columbiamt.com/CMT-Dot-Peen-Scribe/EcoMark_Laser_Marking_Machine_2.html#210
Part: Stainless Steel Plate Material: Stainless Steel Character size: 1/8” Number of characters: 20 Note: Two lines of information Machine used: IM-IS60 Air scribe PSI: 30 Cycle time: 5 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/
Part:Cast Steel Tube Material: Steel Character size: 3/16″ Number of characters: 26 Note: Two lines of information Machine used: IM-IS60 Air scribe Cycle time: 20 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe
Part:Bearing Cap Casting Material: Aluminum Character size: 1/2″ Number of characters: 5 Note: One line of information Machine used: IM-IS60 Air scribe Cycle time: 3 sec For more on the marking system used please see: http://columbiamt.com/CMT-Dot-Peen-Scribe/
Part: Steering Knuckles Material: Cast Iron Number of Characters: Prick Punch Model: 95 POW-R-MARK Cycle time: 2 sec Air Pressure: 60 psi For more on the marking system used please see:http://www.columbiamt.com/store/95_High_Power_Air_Hammer.html
Part: Round Wood Part Material:Wood Character size: 3/8″ Number of Characters: 4 Model: 85 Single Blow Air Hammer Cycle time: 2 sec Air Pressure: 60 psi For more on the marking system used please see: http://www.columbiamt.com/store/85_Medium_Power_Air_Hammer.html
Part: Rolled Steel Material: Cold Rolled Steel Character size: 1/8″ Cycle time: 1 sec 80 psi Number of Characters: 1 For more on the marking system used please see:http://www.columbiamt.com/store/95_High_Power_Air_Hammer.html
Part: Rolled Steel Material: Wood Block Character size: 1/4″ Number of characters: 4 Model: POW-R-Mark model 95 with custom holder Cycle time: 1 sec Air pressure: 80 psi Number of Characters:4 Notes: When marking wood please request special engraved characters. These Read more