LE16 Auto Door Adjustment


Customer is having some issues with their enclosure. When the fume extractor is on (even on its lowest setting) the automatic door won’t open (they have the proper PSI that is recommended by CMT).



    In reference to your customers question about the laser enclosure door.

  1. The suction from the door seal / fume extractor may require the customer to increase the air pressure to operate the door. This can be done via the regulator mounted on top of the enclosure. My suggestion would be to increase it gradually when the door should be opening until it breaks the seal.
  2. Concerning the pinch point issue.  The cylinder that opens and closes the door is magnetically coupled to the door for this exact safety concern. If the door is jammed or grabbed during operation the magnet will break free from the door. (See attached photos)