Chat

Search

Categories

Evonda Mircevski

ID60 Test Mark Filtration Housing Component

Marking Solution tested: ID60

Part Description: Filtration housing component

Part Material: Glass filled nylon

Mark info: Character size: 5MM

Information in 2D code:

Mark cycle time required: N/A 8.7 seconds as tested

Mark info: # of characters: Varied as need… Continue reading

Servo Roll Marking System

Roll Marking Machine

The CMT 860S Custom Servo roll marking machine offers latest technology in both Roll Marking and Error Proofing. The marking legend length is precisely programmed to assure the exact length every time. This further reduces tooling changeover… Continue reading

Automated Impact Marker Station

Automated Impact Marker Station

The CMT Slide-A-Marktm Floor mounted pedestal is used in robotic cells to provide the fastest date marking operation available. Complete cycle time including loading and unloading part is less than 3 seconds, marked to the depth… Continue reading

Eclipse Laser Enclosure Line

Custom Laser Marking Machine

Large bed laser enclosure CMT Eclipsetm LE48 is a perfect versatile low volume large part laser marking station. The LE48 is a Class 1 certified laser enclosure (CDRH). CMT offers a variety of laser source selection,… Continue reading

Air impact marker marking harden cast iron parts.

Model used: 851-OK-25-00 ( Air impact Marker ) with 751KC100 Holder 

Many times CMT is asked, can air impact markers mark harden parts. The answer is yes, but there are issues to consider. 1) Reduction in the amount… Continue reading 

The Assembly Show

Come See Us @ The Assembly Show at Booth #1305

ON Oct 23-25, 2018 in Rosemont, IL

http://www.theassemblyshow.com/

Average weight per Impact Marker

Q: What are the weights for air impact markers models 88,98,288,298,451,751,851 and 78?

 

A: Average weight per model – options selected may impact weight.

Model 88 –  6.5 lbs.

Model 98 –  15 lbs.

Model 288 –… Continue reading

Differences between CMG13 & CMC

Q: What is the difference between the CMG and CMC groove stamps?

 

A: Both the length of the stamps and the groove location are different. The CMG stamps are used in the very popular CMT air impact markers.

 … Continue reading

Machine ID

Machine ID

Q: Where to find the I-Mark Machine ID?

A: The 8 digit code is found under the diagnostics tab. This is sometimes required to issue a new key.

 

Soft Home position

Here are some screen shots as well as instructions on setting the soft I recommend that after 15 to 20 runs send the marking head back to the hard home position as it will tend to drift as once that… Continue reading